Car use detector/ Car use alarm Parameters
car, bus, taxi use gas detector

Gas detector for Car: Type:ACG-1

Detector+Control Panel Kit
1.Sensor:Semiconductor sensor
2.Detecting Gas:Natural gas
3.Enivronmental parameter:temperature: -20℃~+105℃ RH: ≤85% (Non-condensing)
4.Alarm method:Flasher and Sounder
5.Alarm Volumn:>70db(1m around)
6.Alarm value:1.0-25% LEL
7.Working voltage:12vdc
8.Power consumption:<5w

car, bus, taxi use gas detector

Gas detector for Car: Type:ACG-2

Detector+Control Panel Kit
1.Sensor:Semiconductor sensor
2.Detecting Gas:Natural gas
3.Temperature: -20℃~+105℃ RH: ≤85% (Non-condensing)
4.Alarm method:Flasher and Sounder
5.LCD display
6.Alarm value:1.0-25% LEL
7.Working voltage:12vdc
8.Power consumption:<5w

car, bus, taxi use gas detector

Gas detector for Car: Type:ACG-3

Detector+Control Panel Kit
1.Sensor:Semiconductor sensor
2.Detecting Gas:Natural gas
3.Ttemperature: -20℃~+105℃ RH: ≤85% (Non-condensing)
4.Alarm method:Flasher and Sounder
5.Alarm Volumn:>70db(1m around)
6.Alarm value:1.0-25% LEL
7.Working voltage:12vdc
8.Power consumption:<5w

car, bus, taxi use gas detector

Gas detector for Car: Type:ACG-4

Sensor+Control Panel Kit
1.Sensor:Semiconductor sensor
2.Detecting Gas:Natural gas
3.Enivronmental parameter:temperature: -20℃~+105℃ RH: ≤85% (Non-condensing)
4.Alarm method:Flasher and Sounder
5.Alarm Volumn:>70db(1m around)
6.Alarm value:1.0-25% LEL
7.Working voltage:12vdc
8.Power consumption:<5w

Application:
Car use gas detector for monitoring the natural gas leakage, the product has a high
Sensitivity, high stability, is an effective high-quality product to monitor the use of the natural gas
Leakage, to avoid the risks.

Once the concentration of the gas reaches the alarm value preset, the alarm will send audible and visual alarm signal to remind you to take prompt and effective measures to avoid fire, explosion, asphyxiation and death of fatal accidents.


Please notice:
1.The controller is installed in the cab operating table;
2.The detector is installed in where near the engine compartment, valves, cylinders mouth or other joints.
3.Firm the controller and detector, avoid falling off the components;