Wireless Alarm Panel Parameters Remarks
wireless alarm panel

Type:AWL-P1


1.Specification: 26.5cmx26cmx8cm (width, height, depth) (Except the exceed part of the antenna.
2.Voltage: AC 220±15%V      
3.Battery: 12V/7AhAuxiliary output current: <750mA
input current of the signal: <2A
4.wireless networking frequency: Type A: 315MHz   Type B: 230MHz
5.The distance of wireless communication: 
Type A: the distance is more than 500 meters between detector and the control panel (widen space)
The distance between the remote control and the control panel is more than 100 meters (widen space)
Type B: 3-100 kilometers between detector and the control panel (widen space)

100 wireless protection zones, 16 conventional wire zones

Suitable for commercial or industrial use

wireless alarm panel

Type:AWL-P2

Alarm control panel:
(a) operating voltage: DC9V          (b) Average power: AC/DC exchanger 300mA
(c) operating Frequency: 433.92 MHZ±2KHZ/315 MHZ

Remote controller
(a) operating voltage: DC12V        (b) Emission Distance: ≥30m
(c) operating Frequency: 433.92 MHZ±2KHZ/315 MHZ

16zones protection area

Accessories:Wireless Magnetic Door detector,Wireless panic button ,Wireless viberation sensor

 
wireless alarm panel, GSM alarm panel

Type:AGSM-1

GSM Alarm Panel

Technical Parameters:
1) Working Voltage:DC 9~12V
2) Static Current:<30mA
3) Working Temp:-15℃~+55℃ RH≤90%
4) GSM Transmitting Frequency:CLASS4(2W)/EGSM900,CLASS1(1W)/GSM1800
5) Wireless Working Frenquency: 315±0.2MHz MHz 
6) Wireless encoding model: ASK 
7) Receiving Sensivity:-95dBm@12dB SINAD
8) Wireless detectors qty:28pcs 
9) Alarming call qty: 7 rows
10) External siren VOL:  ≥110db